Our OM AUTOPUMP DIGITAL water level controller is a smart solution that automates your water pump, enabling it to start and stop according to the tank’s empty and full levels. This convenient feature saves you time and effort while ensuring that your tank remains at the desired water level. In addition to this, the controller comes equipped with several advanced features such as high-low voltage cut-off, overload protection, current-based dry run protection, auto start function, delay start timer, auto-stop siren, and run time over timer. These features work together to safeguard your pump and the controller from any electrical issues that may arise.
- High -low voltage cut off
- Overload protection
- Current based dry run protection
- Auto start feature
- Delay start timer
- Auto stop siren
- Auto / manual facility
- Run time over timer
HIGH: When input supply voltage exceeds above SET voltage, it cuts off the mains supply to protect your PUMP. High voltage cut off level can be programmed (set) by user himself.
LOW: When input supply goes below SET voltage, it cuts off the mains supply to protect your PUMP. Low voltage cut off level can be programmed (set) by user himself.
OVERLOAD: It protects your pump from burning due to overload. Overload cut off level can be programmed (set) by user himself.
CURRENT BASED DRY RUN PROTECTION: Prevents pump from running dry without water and thus burning out. Dry run off level can be programmed (set) by user himself.
AUTO START: When supply voltage becomes normal, electric supply will be turned ON automatically.
DELAY START TIMER: When supply voltage becomes normal, the electric supply to the output turns ON after a delay of 10 seconds, which protects the motor in case of frequent voltage fluctuations.
AUTO STOP SIREN: In case of any fault trip condition, a buzzer will sound only for 5 seconds.
AUTO / MANUAL SWITCH: In AUTO mode, the pump will automatically turn ON and OFF by sensing the water level in the tank, whereas in MANUAL mode pump has to be turned ON and OFF manually by push buttons only and water level in the tank will not be checked.
RUN TIME OVER TIMER: If pump remains ON for a time greater than the programmed time, then system will trip in “RUN TIME OVER”. In this way, even in a sensor fail condition, pump will not remain ON continuously.
Reviews
There are no reviews yet.